Estratégias de pré-tratamentos para a produção de metano a partir dos resíduos lignocelulósicos dos biocombustíveis

Abstract

This study aimed the evaluation of the anaerobic biodegradability and methane production potential (MPP) of three lignocellulosic wastes derived from the biofuels production chain: palm oil mesocarp fiber (PMF), sugarcane bagasse (SCB) and cotton linter type 4 (CL4). Three different types of physico-chemical pretreatments were used (hydrothermal hydrolysis, acid hydrolysis and alkaline hydrolysis), which were evaluated based on the solubilisation of sugars or extraction of lignin. Different reaction times, temperatures, mass/volume ratios, and concentrations of acid or alkali were used for seeking the best pretreatment that improves the anaerobic digestion of the material. The data of the pretreatments were analysed using multivariate factorial design 22 or 23, with the central point in triplicate (level 0) and six star-points (when necessary). The MPP and anaerobic biodegradability obtained with PMF, SCB and CL4 without pretreatment were, respectively, 77.8, 35.6 and 165.3 L CH4/kg substrate and 8.7, 4.4 and 24.1%. The results obtained with the PMF showed that the best MPP (199 L CH4/kg substrate) was obtained using acid hydrolysis with [HCl] of 1.97 M, during 34 min, at 103 ° C, which promoted 19% of biodegradability. Anaerobic digestion SCB is improved when using hydrothermal hydrolysis (10 min, 200 °C) resulting in a MPP of 199 L CH4/kg substrate and an anaerobic biodegradability of 27.4%. The best results of CL4 were MPP of 397.1 L CH4/kg substrate and biodegradability of 49.1% obtained with acid hydrolysis ([HCl] of 1 M, 136 °C, 20 min). Despite the several pretreatment cause significant increase in the anaerobic hydrolysis of these lignocellulosic wastes, the power generated from methane (PMF = 6.9 MJ/kg Subst, SCB = 6.8 MJ/kg Subst, CL4 = 13.2 MJ/kg Subst.) were lower than that obtained by the eventual direct combustion of the fibre (PMF = 9.6 MJ/kg Subst, SCB = 7.2 MJ/kg Subst, CL4 = 17.3 MJ/kg Subst. CL4 in the form of briquette). An alternative is to use the alkaline hydrolysis for extracting lignin and further use in the chemical industry, as well as for power generation. The results show that it is possible to extract up to 91% of the lignin present in the PMF and 80% in the SCB, which can generate up to 180 and 313.4 L CH4/kg of the hydrolysed PMF and SCB, respectively. These values are sufficient to produce 6.2 and 11.2 MJ/kg Subst, respectively.