F-free mould powders for low carbon steel slab casting - technological parameters and industrial trials

Abstract

The choice of the mould powder for slab casting is a difficult task because mould powders have many important functions during the continuous casting of steel. CaF2 is a key ingredient in conventional mould slags since it reduces the viscosity, the liquidus temperature and the break temperature. Fluorine in mould powders is undesirable from the environmental and health points of view due to the following reasons: (i) evolves easily from slags, producing health-injurious gaseous substances, such as hydrofluoric acid; (ii) creates problems for storage and utilisation of solid waste and (iii) causes machinery corrosion. Aim of the present work is to describe the development of a new F-free mould powder for low carbon steel slab casting replacing CaF2 with B2O3. Laboratory tests and industrial trials were performed considering the technological parameters viscosity, break temperature and crystallisation tendency. From laboratory tests it was concluded that important technological parameters are similar when comparing the Fbearing mould powder (reference) and the new F-free B-bearing mould powder for low carbon steel slab casting: viscosity at 1300°C, break temperature, and crystallisation tendency. It was observed during industrial trials that a significant decrease of the submerged entry nozzle erosion was observed. The results were similar when comparing the F-bearing and the F-free performance: slag pool thickness measurements, melting behaviour, Al2O3 absorption, mould powder consumption and slabs superficial quality.