Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ufc.br/handle/riufc/63854
Tipo: Artigo de Periódico
Título : Characterization and application of a selective coating for solar collectors from of the cashew nut shell liquid
Título en inglés: Characterization and application of a selective coating for solar collectors from of the cashew nut shell liquid
Autor : Pinho, Diego Caitano de
Freire, Francisco Nivaldo Aguiar
Araújo, Felipe Alves Albuquerque
Dutra, Kaio Hemerson
Teixeira, Edwalder Silva
Silva, Maria Eugênia Vieira da
Rocha, Paulo Alexandre Costa
Palabras clave : Solar energy;Collectors;Selective surface;Cashew nut shell liquid;Efficiency
Fecha de publicación : 2019
Editorial : Institution of Mechanical Engineers. IMechE ; SAGE - https://journals.sagepub.com
Citación : PINHO, Diego Caitano; FREIRE, Francisco Nivaldo Aguiar; ARAÚJO, Felipe Alves Albuquerque; DUTRA, Kaio Hemerson; TEIXEIRA, Edwalder Silva; SILVA, Maria Eugênia Vieira da; ROCHA, Paulo Alexandre Costa . Characterization and application of a selective coating for solar collectors from of the cashew nut shell liquid. Proc IMechE Part L: J Materials: Design and Applications, v. 234, n. 1, p. 167–174 , 2019.
Abstract: Solar energy is the most promising energy source, due to its great availability and applicability in thermal energy appli- cations. However, researchers still experience technological and economical challenge, since many systems that use this energy still have low efficiency and high cost. In this way, the development of new materials and technologies to increase the efficiency of solar thermal collectors is both a challenge and a necessity. In this context, the objective of this work is to obtain and analyze selective surfaces for solar thermal collectors, using cashew nut shell liquid. The cashew nut shell liquid can be classified as technical or natural, depending on the mode of extraction of cashew liquid. An experimental bench was built to simulate a flat plate solar collector under real operating conditions. For comparative purposes, the tests were performed between the cashew nut shell liquid and the commercial surface (MRTiNOX). In order to verify the structure morphology and the chemical composition of the surface, analyzes were performed by scanning electron microscopy. In order to identify the presence of components after the sintering process, the infrared analysis technique was used. To analyze the surface absorbance, the ultraviolet–visible spectroscopy absorbance technique was used. With the tests in real conditions, it was possible to perform the temperature measurements, and later, with the energy balance, the absorptivity, emissivity, and efficiency were calculated. The technical cashew nut shell liquid presented efficiency of 42.86%, while the MRTiNOX, 41.8%. In contrast, natural cashew nut shell liquid obtained efficiency of 31.28%. Thus, the use of technical cashew nut shell liquid, a low-cost regional product, was presented as a viable and satisfactory solution for cost reduction in solar thermal collectors.
URI : http://www.repositorio.ufc.br/handle/riufc/63854
ISSN : 1464-4207 versão impressa
2041-3076 versão online
Aparece en las colecciones: DEMM - Artigos publicados em revista científica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
2019_art_dcpinho.pdf989,85 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.