Estudo da tecnologia de eletrocoagulação aplicada ao tratamento de efluente têxtil utilizando corrente contínua pulsada

Abstract

The present work proposed to investigate the electrocoagulation technology (EC) for the treatment of textile effluent using pulsed direct current (CCP) and stainless steel electrodes 304. The effluent used was collected in a textile manufacturer networks in the municipality of Jaguaruana -CE. The Response Surface Methodology Box-Behnken was used to analyze and optimize the operating conditions, aimed at maximum removal of color, turbidity and chemical oxygen demand (COD) of the textile effluent. The experiments were performed with a reaction volume of 2.6 L in batch mode. The COD degradation kinetics was studied using non-linear regression fit, according to the second order kinetics model. Based on these results the optimal configuration was considered: agitation speed = 200 rpm, frequency of electrical pulses = 1000 Hz and spacing between electrodes = 1 mm, in 50 minutes of EC. Under these conditions color removals were obtained, turbidity and COD, respectively 98.94%, 85.87% and 81.23%, adjusting the COD value to discharge standard required by Ordinance No. 154/2002 of the State Superintendent of Half Environment (SEMACE). In addition, it was found that the CS process is also effective for reduction of total suspended solids, total nitrogen, sulfide and sulfate, as well as for the reduction of acute toxicity Lactuca sativa forward, raising the value of the Growth Index Relative (ICR) and germination index (GI) initially recorded for the raw wastewater. The concentration of chloride ions has not decreased during the EC, presenting itself as a favorable aspect for the reuse of treated effluent in own textile production process, which demands a high concentration of sodium chloride (NaCl).