Utilização de motores de indução trifásicos em manipulador articulado com 2 graus de liberdade considerando estratégias de controle vetorial de campo orientado indireto e modo de controle deslizante

Abstract

This paper proposes the position control of an articulated manipulator of two degrees of freedom driven by induction motors with a controller in the current loop. The work includes the mechanical modeling of the handler that will be developed from the direct and inverse kinematics and position control of induction motors operating system and uncoupled allocated in the manipulator. Thus, we developed two strategies for control of manipulators with two degrees of freedom, one using the scheme for field-oriented vector control and other means of indirect sliding mode control (Sliding-Mode Control - SMC). These control strategies are applied to current loop of induction motors that drive the manipulator. The parameters of the position controller of manipulator are taken into account in calculating the controller parameters of the current control loop, in order to obtain satisfactory results in the positioning the degrees of freedom. In addition, we performed a comparative study between the indirect field-oriented vector control and sliding mode control applied to the current loop. The advantage of the SMC compared to the indirect field-oriented vector control due to the first had in its control law, developed in this thesis, the use of position degree of freedom manipulator applied directly in the control law, while the second acted only as a disturbed rejection controller for the position loop. The Proportional-Integral (PI) was used in the position and speed loops for both current control algorithms to provide a standard for comparison between. For the purpose of implementing the control system individually for each engine and motors coupled to the manipulator used a digital signal processor.